Cleaning Verification
AAMI and AORN recommend testing of the cleaning process daily, or each day used. Comply with these standards by utilizing ProFormance™ monitoring tools. Individually and as a part of complete kits, the ProFormance™ line of products provide an objective test of cleaning methods that are clearly visible and easy to interpret.
Cleaning Verification
Showing 1–12 of 32 results
-
AquaTest™ 3-in-1 Water Quality Test Strips
$1.00Water quality is key to the performance of chemical cleaning agents. In particular, hard water binds up detergent molecules, preventing them from breaking down the contaminants. Further, these molecules are often a source of staining and pitting of surgical instruments. Enzymes used in enzymatic detergent are highly influenced by the pH level of water. An improper pH level can lead to the partial or complete inactivation of the enzymes relied upon to breakdown the soil on instruments. Total alkalinity measures the amount of alkaline buffers in water.
Add to cart View Detail -
CartWashCheck™
$1.00Cart washers are important tools in the overall effort to reduce cross contamination. Often they are used to clean not just surgical case carts, but also basins, instrument trays, wheel chairs and other supply and patient transport equipment. The CartWashCheck™ is the first test designed to challenge the mechanical efficiency of the cart washer. These convenient tests can be quickly and easily adhered to any metal surface with the peel off adhesive that leaves no residue.
Add to cart View Detail -
ChannelCheck™
$1.00ChannelCheck™ is the first product capable of testing virtually any lumened instrument for residual organic soils, no matter the channel size. ChannelCheck™ tests for three common organic soils at once: blood, protein and carbohydrates. Simply flush an individual lumen with prepackaged water and recover that water. Then dip the test strip in the recovered water for 5 seconds. Remove the strip, wait 90 seconds and then compare the color of the pads to the results chart. Should any of the pads indicate there is residual soil, reclean the item and then retest.
Add to cart View Detail -
ChannelCheck™ Convenience Pack
$1.00Designed as a simple flush method test, the ChannelCheck™ allows your department to simultaneously check for protein, carbohydrates, and hemoglobin residue after cleaning. The ChannelCheck™ is the first product that is capable of testing virtually any lumened instrument for residual organic soils, no matter the channel size.
Add to cart View Detail -
CycleCheck®
$1.00Designed to record the thermal disinfection temperature reached during each washer cycle, the CycleCheck® indicates whether water reached the surface of the coupon during the cycle.
Add to cart View Detail -
DetergiCheck™ Proteolytic Detergent Test
$1.00Crucial to a cleaning efficiency of an instrument washer is the adequate concentration and exposure to chemicals capable of breaking down (hydrolyzing) protein which are water insoluble, such as fibrin. Sometimes, however, the detergents do not get to the washer chamber or are not delivered at the proper volume.
Add to cart View Detail -
FlexiCheck™
$1.00This three part kit simulates a lumened or cannulated item and is designed to challenge the cleaning efficiency of automated washers with channel irrigation apparatus. The kit includes a clear flexible tube, attached to a stainless steel lumen device. The test coupon is placed in the lumen and the entire device is hooked up to the irrigation port of an automated washer. The test coupon includes two soils, components of blood soil and polysaccharide soil.
Add to cart View Detail -
Getinge Assured SafeStep – ATP Monitor
$1.00The Getinge Assured ATP Monitor verifies the cleanliness of surfaces and cannulated instruments in just 15 seconds. By detecting ATP (adenosine triphosphate) – the energy molecule found in all human, animal, plant, bacterial, yeast, and mold cells – SafeStep gives you the testing power to minimize HAIs and improve patient and staff safety.
Add to cart View Detail -
Healthmark Watermark™
$1.00The Healthmark Watermark™ is a bumper sticker sized liquid crystal thermometer with a "water fill line" that adheres to the inside of a manual and or ultrasonic soaking bath, tub, sink or basin. Following the instructions of your detergent manufacturer, determine the appropriate water level for the bath. In the write in space, note the volume of water. Staff should then be instructed as to the amount of detergent to add to the bath, in accordance with the detergent manufacturer's IFU.
Add to cart View Detail -
HemoCheck™
$1.00Go beyond what you can see and test instruments with the HemoCheck™ blood detection kit. Finding a stain on an instrument that has gone through reprocessing is never good. If the stain is blood, the implications are even more serious. The HemoCheck™ is an all-in-one test, provides a result in 30 seconds, is simple to interpret and indicates blood residue down to 0.1μg.
Add to cart View Detail -
HydroCheck™
$1.00Designed for detecting residual moisture in channels, the single-use HydroCheck™ assists in detecting moisture. The user-friendly test kit can detect as little as 0.05 μL of residual moisture, providing immediate results.
Add to cart View Detail -
LumCheck™
$1.00LumCheck™ is designed as an independent check on the cleaning performance of pulse-flow lumen washers. Embedded on the stainless steel plate is a specially formulated blood soil which includes the toughest components of blood to clean. After washing, if the LumCheck™ is visually clean, the test indicates that the washing device is working properly. If residue remains on the plate, the LumCheck™ indicates a failure in the washing process, which requires further investigation. The LumCheck™ is made up of three key components: The Test Soil, the Stainless Steel Plate and the LumCheck™ Holder.
Add to cart View Detail
